The listed tools are for routine maintenance only. Prepare other tools as required.
2.2 Reference Documentation
The documents provided in the solution only include the special maintenance
items, maintenance methods, and precautions of the components. For other
maintenance items of the components, see the documents delivered with the
components.
Table 2-2 Maintenance documents to be prepared
Component Document
Integrated UPS
UPS5000-E-(50 kVA–125 kVA) User Manual
(Integrated UPS 3.0)
NetCol5000-A025 In-row Air
Cooled Smart Cooling Product
NetCol5000-A025 In-row Air Cooled Smart
Cooling Product User Manual (300 mm
Width))
ECC800-Pro
ECC800 Data Center Controller V100R21C00
User Manual (for ECC800-Pro)
NetEco
iManager NetEco Product Documentation-
(V600R021C00)
● The ECC800-Pro/NetEco version depends on the version in use. Click on the
ECC800-Pro/NetEco WebUI to obtain the current version.
● For NetEco maintenance, see the NetEco documents.
2.3 Pre-fab. Module Entry and Working Requirements
The following table describes the requirements for working in the FusionDC1000.
Item
Requirement
Before entry ● Obtain the entry permit.
● Perform detailed operations based on the requirements
specied by the manager of the FusionDC1000.
FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario) 2 Operation and Maintenance Preparations
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 17
To Next Page
Loading...
Need help?
General