Huawei FusionDC1000A - Replacing a T;H Sensor

To Next Page

To Previous Page

Figure 4-17 Moving the smart cooling product

4. Move the smart cooling product out of the pre-fab.module using a forklift.

Step 14 Install a new smart cooling product.

1. Install the new smart cooling product, and connect structural kits, pipes, and

cables.

2. Perform power-on commissioning for the smart cooling product to verify that

the new smart cooling product is working properly. For details, see documents

delivered with the smart cooling product.

3. Reinstall the removed components.

----End

4.2.2.1 Replacing a T/H Sensor

Prerequisites

● A T/H sensor needs to be replaced.

● A spare T/H sensor of the same model is available and functional.

Context

A T/H sensor can be maintained only from the rear door.

FusionDC1000A Prefabricated All-in-One Data

Center

Maintenance Guide (IT Scenario) 4 Parts Replacement

Other manuals for Huawei FusionDC1000A