Huawei FusionDC1000A - Replacing an Outdoor Fan

To Next Page

To Previous Page

Step 3 Cut o the cable tie that binds the cable for the faulty fan, and remove the fan

terminal, as shown by (1) in Figure 4-19.

NO TICE

When removing a fan, remove the screws before loosening the captive screws.

When installing a fan, tighten the captive screws clockwise, and then install the

screws.

Step 4 Use a Phillips screwdriver to remove the four screws that secure the fan, and

remove the faulty fan and fan guard.

Figure 4-19 Removing a fan

Step 5 Install a new fan and fan guard, connect the connectors, and use a cable tie to

secure the cable.

Step 6 Turn on the switch for the faulty fan and close the front door.

Step 7 On the LCD home screen, choose Maint > Performance Maint, and clear the

indoor fan runtime.

Step 8 When the device is in the Startup status, manually clear the alarm. Ensure that

the smart cooling product is running normally without any alarms.

----End

4.2.2.5 Replacing an Outdoor Fan

Prerequisites

● Recommended tools and materials: hex key, Phillips screwdriver, socket

wrench, small at-head screwdriver (2 mm), diagonal pliers, cable ties, and

new fan

● Preparations: Shut down the system and cut

o external power supplies.

FusionDC1000A Prefabricated All-in-One Data

Center

Maintenance Guide (IT Scenario) 4 Parts Replacement

Other manuals for Huawei FusionDC1000A