Huawei FusionDC1000A - Page 31

Step 4 Apply two layers of paint on the damaged nish coat based on the damage
degree of the paint using a spray bottle, brush, or painting gun.
NO TE
In the case that a pre-fab. module pattern has dierent colors, to prevent undamaged areas and
those with dierent colors as the damaged area from being polluted during repainting, cover
such areas using white paper and adhesive tape before repairing paint.
Figure 3-4 Manual paint spray
Figure 3-5 Repainting using a brush
FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario) 3 Routine Maintenance
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 23