Huawei FusionDC1000A - Fire Extinguishing System; System Overview

To Next Page

To Previous Page

Step 3 Pull the water pan cover outward.

Figure 4-32 Pulling the water pan cover outward

Step 4 Remove the two screws that secure the sheet metal fastener of the liquid level

detector, disconnect the interconnection terminal of the liquid level detector, and

then remove the sheet metal fastener of the liquid level detector.

Figure 4-33 Removing screws from the sheet metal fastener of a liquid level

detector

Step 5 Use a Phillips screwdriver to remove the screws that secure the high liquid level

detector, and remove the high liquid level detector (the low liquid level detector

can be taken out by rotating it).

FusionDC1000A Prefabricated All-in-One Data

Center

Maintenance Guide (IT Scenario) 4 Parts Replacement

Other manuals for Huawei FusionDC1000A