Figure 4-56 General ground bar
4.3.2.2 Connecting Cabinet Input Power Cables
Context
The power distribution subrack position in the cable connection
gure is for
reference only. The actual position prevails.
Procedure
Step 1 (Optional) Connect input power cables to the PDU.
1. (Optional) Remove the transparent protective panel at the rear of the PDU.
2. Connect input power cables to the PDU.
FusionModule500 Smart Mini Data Center
User Manual 4 Installation Guide
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 100
To Next Page
Loading...