Step 5 Connect the server power cable.
1. Wear an ESD wrist strap or ESD gloves.
2. Connect one end of the power cable to the cable port on the AC power
module of the server.
Figure 4-26 Connecting the power cable
3. Use a hook-and-loop fastener to secure the power cable.
Figure 4-27 Securing the power cable
4. Route the power cable along the cable tray neatly, use cable ties to bind the
power cable, and use diagonal pliers to trim
o the excess of the cable ties.
----End
4.2.6.7 (Optional) Installing a Camera
Prerequisites
● A camera and tools for installing it have been prepared.
FusionModule500 Smart Mini Data Center
User Manual 4 Installation Guide
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 84
To Next Page
Loading...