EasyManuals Logo

Huawei FusionModule500 V100R021C10 User Manual

Huawei FusionModule500 V100R021C10
241 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Figure 5-12 Removing the fastener
NO TICE
If the door still cannot be opened or closed properly, check the following items:
Whether cables are connected correctly
Whether the DIP switch setting is correct
----End
5.3.8 Commissioning Event Notication
You can set alarm notication by email or SMS as required. Information about a
maximum of 20 users who will receive alarm
notication can be displayed.
Prerequisites
To implement alarm notication by SMS, the following conditions must be met:
The ECC800-Pro is congured with a 4G module and supports SIM card access
in 2G/3G/4G mode. The 3G card supports only the WCDMA modes.
To implement alarm notication by email, the following conditions must be met:
The ECC800-Pro is connected to a network with an email server through a
WAN port. Both the Internet and local area network (LAN) are supported.
NO TE
The ECC800-Pro supports only SMS notication service but not data service by using the 4G
module.
Procedure
Step 1 Choose System Settings > Event Notication.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 134

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionModule500 V100R021C10 and is the answer not in the manual?

Huawei FusionModule500 V100R021C10 Specifications

General IconGeneral
BrandHuawei
ModelFusionModule500 V100R021C10
CategoryData Loggers
LanguageEnglish

Related product manuals