Step 2 Set related outbox parameters.
1. Set related parameters in the Outbox Settings area on the Mailbox Settings
tab page. If the address type of the outbox is Domain name, choose System
Settings > System Parameters, and set related parameters in the DNS
Server Address area on the Monitor IP tab page.
The DNS server address is provided by the local network operator.
2. Click Test to check the email sending. If an email fails to be sent, check the
outbox settings and DNS Server Address. If the email is sent successfully,
click Submit.
If "Test email sending failed" is displayed, check whether the recipient's email
server requires CA
certicate verication. If it is required, download the CA
certicate from the receiver's email website and upload it in the Mailbox
Certicate area.
Figure 5-13 Email setting page
The following email addresses are for reference only (the actual parameters apply) and are used
only for
conguring the email function.
Table 5-13 Main parameters on the sender's email conguration page
Email
Type
Email
Server
Domain
Name
Mailbox Server
IP Address
Encryption
Mode and
SMTP port
Remarks
Sina Mail smtp.sina.co
m
How to obtain: Non-
encryption: 25
● The email
server must
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 135
To Next Page
Loading...
Need help?
General
