● The preset user of NetEco is admin, the preset password is Changeme_123. This user has
all the operation rights on the managed objects. After the rst login, change the
password in time to ensure account security and prevent unauthorized network attacks,
such as data tampering. Huawei will not be liable for any security issues caused by your
failure to change the preset password in time or password loss after changing.
● If the number of online users reaches the maximum number supported by the system, a
message is displayed, indicating that you cannot log in. In this case, contact the system
administrator.
● After you enter the incorrect password for three consecutive times, you must enter the
verication code upon the fourth login. After you enter the incorrect password for ve
consecutive times, the user account or the IP address is locked for 10 minutes.
----End
5.3.12.1.6 Loading a NetEco License
The NetEco license le is used to control the functions and management
capabilities of the NetEco. Before using NetEco, you need to load a commercial
license.
Prerequisites
● You have obtained a license.
● You are logged in to the NetEco client.
Procedure
Step 1 Click Import License
le when you log in to the NetEco at the rst time.
Step 2 Click next to the License text box and select a license le.
Step 3 Click Upload.
The information about the imported license le is displayed.
Step 4 Click Apply.
----End
5.3.12.1.7 Installing the NE Mediation
Prerequisites
● You have logged in to the NetEco client by web browser.
● You have obtained the NE mediation software package.
Procedure
Step 1 Obtain the installation package of the mediation software.
● For enterprise users:
a. Log into Huawei's enterprise support website https://
support.huawei.com/enterprise.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 164
To Next Page
Loading...