Table 5-21 Setting the authentication password
Path Parameter Default
Value
Setting
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Authenticatio
n password
Modifyme
_123
Set this parameter based on
customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
Conrm
authenticatio
n password
— —
Step 5 Click Submit.
----End
5.3.12.1.3 Obtaining the NetEco Software License
The NetEco software license is not provided together with software to the
customer. Therefore, obtain the NetEco software license in advance.
Obtain the license from the Huawei's enterprise support website.
● For enterprise users:
a. Log in to Huawei's enterprise support website https://
support.huawei.com/enterprise.
b. Browse or search the iManager NetEco 6000 License Application Guide
or obtain the
iManager NetEco 6000 License Application Guide
from
Technical Support > Product Support > Network Energy > Modular
Data Center > iManager NetEco 6000. Then, apply for the license of the
NetEco software by referring to the guide.
● For carriers users:
a. Log in to Huawei's carrier support website https://support.huawei.com.
b. Browse or search iManager NetEco 6000 License Application Guide,
obtain
iManager NetEco 6000 License Application Guide
from Support >
Product Support > NetWork Energy > Data Center Facility > Fusion
Modular Data Center > iManager NetEco 6000 at https://
support.huawei.com and apply for the license of the NetEco software by
referring to the guide.
5.3.12.1.4 Powering On a Server
This topic describes how to power on a server.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 162
To Next Page
Loading...