Huawei FusionModule500 V100R021C10 - Adding a Module

5.3.12.1.9 Adding a Module
This section describes how to create a module in the root node, subnet, equipment
room, Container, or site management domain.
Prerequisites
● You have logged in to the NetEco client by web browser.
● You have created management domains in Data Center Planning. For
detailed operations, see
Creating a Domain .
Procedure
Step 1 Choose System > Conguration > Data Center Planning from the main menu.
The Data Center Planning window is displayed.
Step 2 Choose the management domain where you want to add a modular from the
navigation tree on the left.
Step 3 Click Domain. The infrastructure area is displayed.
Step 4 Select Modular from the Type drop-down list.
Figure 5-38 Selecting the modular
Step 5 Select the Modular to be added and drag the modular icon to the Room area.
Figure 5-39 Adding the modular in the room area
Step 6 Modify Management Info of the module or retain the default values, and then
click .
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 167