Figure 6-15 Removing the camera
Step 4 Install the new camera and SD card, reconnect the network cable, and secure the
camera to the base using screws.
Step 5 Commission the camera by referring to the ECC800-Pro user manual of the
appropriate version.
Step 6 Check that the camera functions properly.
----End
6.4.3.6 Replacing an IVS1800
Prerequisites
● Recommended tool: Phillips screwdriver
● An IVS1800 needs to be replaced.
● A spare IVS1800 of the same model is available and functional.
Context
Videos cannot be recorded during the replacement of the IVS1800.
Do not operate with power on. Take appropriate insulation measures.
FusionModule500 Smart Mini Data Center
User Manual 6 O&M
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 222
To Next Page
Loading...