Huawei FusionModule500 V100R021C10 - Setting Parameters on the IVS1800 Webui

Parameter Description
I-frame interval This parameter is available only when you set Encoding
protocol to H.264 or H.265.
An I frame is an intra-coded frame that represents a
xed image independent of other picture types. Each
group of pictures (GOP) begins with this type of frame.
A smaller I-frame interval indicates better video quality
and higher bandwidth consumption.
Layered
encoding
This parameter is available only when you set Encoding
protocol to H.264 or H.265.
To enable layered encoding, select Layered encoding.
JPEG quality This parameter is available only when you set Encoding
protocol to MJPEG.
A larger value indicates higher image quality.
----End
Follow-up Procedure
Commission other cameras by referring to this section.
5.3.11.2 Setting Parameters on the IVS1800 WebUI
Prerequisites
For details about the IVS1800 hardware description and installation, see the Quick
Start in the corresponding IVS1800 product documentation. For details about the
IVS1800
conguration, see the Conguration Guide. For details, see the
documentation delivered with the device or obtain the documentation by referring
to the "Reference Documentation" section.
Context
A default IP address has been
congured for the IVS1800 before delivery. Modify
the IP address based on the actual network plan.
Procedure
Step 1 Enter https://
IP address :8443 in the address box, and press Enter.
In the URL, IP address indicates the IP address of the IVS1800. The default IP
address is 192.168.3.111.
NO TE
The OMU portal supports Internet Explorer 10.0 and later versions.
Step 2 Log in to the OMU portal. Set the service system and operating system passwords
at the
rst login.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 152