Huawei iManager NetEco 6000 - Page 125

iManager NetEco 6000
Device Installation and Commissioning Guide
4 Connecting Monitoring Cables to Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
114
Figure 4-56 UPS5000-A-60 kVA/80 kVA/120 kVA functional components and control signal
ports
(1) COM port
Figure 4-57 port on the UPS monitoring module of the 300 kVA UPS and models with higher
capacities
(1) COM port
Step 2 Connect one end of the network cable to the COM port on the ECC collector.