Huawei iManager NetEco 6000 User Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
150

If not all ActiveX controls are enabled, the test connection fails after filling in the correct
parameter information and clicking Test.

Enable ActiveX controls. For details, see 6.3.2.6 Registering with the OCX Plug-in.
Table 6-8 Parameter description
Parameter
Description
Example
Server IP Address
Indicates the IP address of
the video server and correct
IPv4 address, containing
numbers from 0 to 255. The
IP address cannot be 0.0.0.0.
XXX.XXX.XXX.XXX
Server Port Number
Indicates the port number of
the server.
NOTE
The default port number for
VCN500 is 9900.
9900
Server Version
Indicates the version of the
server.
VCN500
Login User
Indicates the user name for
logging in to the IVS client.
NOTE

Only browsing and query
permissions are required
on the NetEco. Configure
video system users who
have only browsing and
query permissions.

The default user name for
VCN500 is Admin. It is
recommended that the new
user name created using
the IVS be used to access
the camera. Before
accessing the camera,
ensure that the initial
password of the user has
been changed and the user
has successfully logged in
to the IVS.

It is recommended that the
number of IVS clients to
which the user can log in
be set to a value greater
than 5. Otherwise, when
the user has logged in to
the IVS client, the user
cannot log in to it through
the NetEco.
Admin

Huawei iManager NetEco 6000 Specifications

General

Brand	Huawei
Model	iManager NetEco 6000
Category	Server
Language	English