Huawei iManager NetEco 6000 - Page 180

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
169
Figure 6-37 Configuring parameters for a UPS5000 MODBUS-TCP
Table 6-14 MODBUS-TCP device parameter description
Parameter
Description
Name
Device name
IP Address
Set the IP address of the device.
Port
Set this parameter to the port through which the device connects to
the collector.
The port number is 502 by default. You can modify the port number
based on requirements.