Huawei iManager NetEco 6000 - Page 188

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
177
Figure 6-40 Configuring the power module SNMP v3 parameters
Table 6-18 SNMP v3 device parameter description
Parameter
Description
Name
Device name
IP Address
Set this parameter to the device IP address.
Port
Set this parameter to the port number of the device. (set to 161 by
default)