Huawei iManager NetEco 6000 - Page 220

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
209
Figure 6-68 Setting port enabling of an NTC sensor
Step 4 Click Submit.
Step 5 Check whether AI/DI_1 Sensor Type is automatically identified as NTC.
Figure 6-69 Setting the sensor type of an NTC sensor
Step 6 Set AI/DI_1 Power Supply to On.
Step 7 Click Submit.
----End