iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 7-15 Removing a hard disk
Step 3 Install a new hard disk.
1. Install the new hard disk.
2. Secure the hard disk to the front panel using a screwdriver.
3. Push the hard disk into the subrack along the guide rails until it cannot move forwards.
4. Close the ejector lever and push the hard disk in position.
Figure 7-16 Installing a new hard disk
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
To Next Page
Loading...
