NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
Copyright © Huawei Technologies Co., Ltd.
The community contains 6–15 characters and must contain at least two types of characters.
Step 3 Set Read Community and Write Community.
1. Click the text box after Read Community, as shown in Figure 4-10. Set Read
Community as planned, click , and then click Submit.
Figure 4-10 Setting read community
2. Click the text box after Write Community, as shown in Figure 4-11. Set Write
Community as planned, click , and then click Submit.
Figure 4-11 Setting write community
Step 4 Add an SNMPv3 user.
1. Click Add under SNMP V3.
2. Enter a planned value for User Name, select values for Auth. Protocol and Prop.
Protocol from drop-down list boxes, and click , as shown in Figure 4-12.
MD5 and DES protocols are not secure. It is recommended that you set Auth. Protocol
to SHA, and set Prop. Protocol to AES. The following operations use the recommended
settings as an example.
To Next Page
