EasyManuals Logo

Huawei NetCol5000-A-035 User Manual

Huawei NetCol5000-A-035
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
4 ACC Introduction
Copyright © Huawei Technologies Co., Ltd.
124
Step 7 Switch the first to fourth toggles of the S2 DIP switch on the main control board to OFF.
Step 8 Connect the main power supply of the device.
Step 9 After the restart completes, the LCD displays the setup wizard screen for setting parameters.
After the system is restored to factory settings, the user password is also reset to the preset password,
and must be promptly modified to ensure information security and normal system running.
----End
4.5.5 How to Troubleshoot the Fault When the System Is in
Upgrade Mode
Context
The system will display the following information and enter upgrade mode when the model
cannot be identified or does not match, or the software versions of the display board and
control board are incompatible.
The model cannot be identified. Entering upgrade mode...
The model does not match. Entering upgrade mode...
Failed to obtain the version information. Entering upgrade mode...
The display board and control board software versions are incompatible. Entering
the upgrade mode...
In the upgrade mode, you can only query the system version information. In this case,
perform the following steps for troubleshooting.
Procedure
Step 1 After you have entered the home screen, choose Maint > USB Operations > Software
Upgrade, and check whether you can perform the upgrade.
If yes, upgrade the system version by referring to the software upgrade guide.
If no, proceed to Step 2 by following instructions of system prompts.
Step 2 If The e-label board is not connected or the e-label is incorrect. Please connect or replace
the e-label board. is displayed, power off the system, reconnect or replace the E-label board,
and then power on the system.
Step 3 If the fault persists, contact Huawei technical support.
----End
4.5.6 How to Fast Shut Down an Smart Cooling Product
Procedure
Step 1 On the home screen of the ACC, tap Shutdown.
The compressor stops running and the fan is shut down after the time delay.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei NetCol5000-A-035 and is the answer not in the manual?

Huawei NetCol5000-A-035 Specifications

General IconGeneral
BrandHuawei
ModelNetCol5000-A-035
CategoryAccessories
LanguageEnglish

Related product manuals