Installation Manual
Quidway R2600/3600 Series Modular Routers
Chapter 5
Startup and Configuration
5-4
Figure 5-5 Setting terminal type
III. Power on the router
After making sure that the router and the configuration terminal are correctly connected
and having completed the setting of configuration terminal parameters, you can power
on the router.
5.1.2 Powering on Router
I. Preparation
Before powering on the router, check:
z That the power and ground cables are correctly connected.
z That the voltage meets the requirements required by the router.
z
That the console cable is correctly connected; the PC or the terminal for
configuration has been started; and the setting is completed.
Warning:
Before powering on the router, please make sure of the position of its power switch so as to cut off power
supply in time when an accident occurs.
To Next Page
Loading...
Need help?
General
