Huawei Quidway R2600 Series User Manual

Installation Manual
Quidway R2600/3600 Series Modular Routers
Chapter 5
Startup and Configuration
5-7
II. Displaying the interface status
Firstly, would you like to see the current interface summary? [yes]:y
Interface IP-Address OK? Status Protocol
Ethernet0 129.102.100.141 yes down up
Serial0 yes up down
Serial1 yes up down
Serial2 yes up down
III. Configuring global parameters
Configuring global parameters:
Enter host name [Quidway]:
Enter enable password []:
Configure SNMP Network Management? [YES]:
Community string []: public
Configure IP? [yes]:
Configure IPX? [NO]: y
IV. Configuring interface
Configuring interface Ethernet0:
Is this interface in use? [YES]:
Configure IP and mask on this interface? [YES]:
IP address for this interface [129.102.100.141]:
Netmask [255.255.0.0]:
Class B network is 129.102.0.0.
IP address is 129.102.100.141, netmask is 255.255.0.0.
Configure IPX on this interface? [NO]:y
IPX network number for this interface [1]:
Configuring interface Serial0:
Is this interface in use? [YES]:
Configure IP on this interface? [NO]:
Configure IPX on this interface? [NO]: y
Configuring interface Serial1:
Is this interface in use? [YES]:
Configure IP on this interface? [NO]:
Configure IPX on this interface? [NO]:
Configuring interface Serial2:
Is this interface in use? [YES]:
Configure IP on this interface? [NO]:
Configure IPX on this interface? [NO]:
V. Displaying configuration results
The following configuration was created:
hostname Quidway
enable password
snmp-server community ro
ipx routing
interface Ethernet0
no shutdown
ip address 129.102.100.141 255.255.0.0
ipx network 1
interface Serial0
no shutdown
no ip address
no ipx network
interface Serial1
no shutdown
no ip address
no ipx network
interface Serial2

Huawei Quidway R2600 Series Specifications

General

Brand	Huawei
Model	Quidway R2600 Series
Category	Network Router
Language	English