Item Description
Terminal ID (H248) If the TID template with which the POTS
user is bound does not support terminal
layering, this parameter needs to be
configured.
User priority According to the service requirements, user
priorities must be specified. The user
priorities include the following:
l cat1: government1 (category 1
government users)
l cat2: government2 (category 2
government users)
l cat3: common (common users)
User type According to the service requirements, user
type needs to be specified. The user type
includes the following:
l DEL: direct exchange lines (default)
l ECPBX: earth calling PBX
l LCPBX: loop calling PBX
l PayPhone: pay phone
Common
parameter
system parameter The system parameters including the
overseas version flag and message waiting
indication (MWI) mode need to be
configured according to the local standard to
ensure that the response of the user terminal
complies with the local standard.
Overseas parameters The attributes such as the upper and lower
thresholds of the flash-hooking duration
need to be configured according to the local
standards to ensure that the response of the
user terminal complies with the local
standards.
POTS port attributes If the POTS port needs to support the polarity
reversal accounting, the POTS port needs to
be configured to support the polarity reversal
pulse. Other attributes do not need to be
modified if there is no special requirement.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 12 FTTO Configuration(SOHO and SME)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1089
To Next Page
Loading...
Need help?
General
