5 ADSL Activating 1002 1 --
6 ADSL Activating 1002 1 --
7 ADSL Activating 1002 1 --
8 ADSL Activating 1002 1 --
9 ADSL Activating 1002 1 --
10 ADSL Activating 1002 1 --
11 ADSL Activating 1002 1 --
12 ADSL Activating 1002 1 --
13 ADSL Activating 1002 1 --
14 ADSL Activating 1002 1 --
---- More ( Press 'Q' to break ) ----
1.3.11.3 Checking the Board Status
This topic describes how to check whether the board works in the normal state.
Procedure
Step 1 Run the display board frameid command to query the status of all the boards.
----End
Result
All the boards work in the normal state. That is, all of the service board status is displayed as
Normal, the active control board status is displayed as Active_normal, and the standby control
board status is displayed as Standby_normal.
Example
To query the information about all the boards of shelf 0, do as follows:
huawei(config)#display board 0
-------------------------------------------------------------------------
SlotID BoardName Status SubType0 SubType1 Online/Offline
-------------------------------------------------------------------------
0
1
2
3
4 H802GPBD Normal
5
6 H802GPBD Normal
7
8
9 H801SCUL Active_normal FLBA
10
11
12 H802GPBD Normal
13
14 H802GPBD Normal
15
16
17 H802GPBD Normal
18
19 H801GICG Normal
20
21
22
-------------------------------------------------------------------------
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74
To Next Page
Loading...
Need help?
General
