Read temperature fault Permit
Fan block Permit
Temperature high Permit
Power fault Permit
----------------------------------------------------------------------------
1.3.17 Saving and Backing Up Data
The MA5600T/MA5603T/MA5608T supports data saving and backup to upgrade the system
or to recover the system in case of an upgrade failure or any other critical events.
1.3.17.1 Manually Saving and Backing Up Data
This topic describes how to manually save data to the flash memory or back up data to the server
in case of data loss caused by an unexpected system restart.
Prerequisites
The file transfer mode is configured. For detailed configurations, see
l Configuring the FTP Transfer Mode
l Configuring the SFTP Transfer Mode
l Configuring the TFTP Transfer Mode
NOTE
You need to configure only one of the above-mentioned three file transfer modes. You are advised to use
SFTP mode.
Procedure
l Manually save data.
System data files are saved manually.
The system data files include the database file and the configuration file. Table 1-42 lists
the commands for manually saving the data files and describes command functions.
Table 1-42 List of commands for manually saving the data files
Operation Command Function
Manually save the database
file
save data Saves only the database file
but not the configuration
file.
Manually save the
configuration file
save configuration Saves only the
configuration file but not
the database file.
Manually save the database
file and the configuration
file
save Saves the database file and
the configuration file.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
127
To Next Page
Loading...
Need help?
General
