Configuration File
interface loopback 0
ip address 3.3.3.3 32
quit
mpls lsr-id 3.3.3.3
mpls
lsp-trigger host
quit
mpls l2vpn
mpls ldp
quit
vlan 4001 smart
port vlan 4001 0/19/0
mpls vlan 4001
interface vlanif 4001
ip address 10.50.50.50 24
mpls
mpls ldp
quit
ospf 1
area 100
network 10.50.50.0 0.0.0.255
network 3.3.3.3 0.0.0.0
return
pw-para 3
peer-address 10.10.10.10
pw-type tdm satop e1
tdm-load-time satop e1 loadtime 125
rtp-header
jitter-buffer buffer-size 2500
control-word
vccv cc cw alert ttl cv lsp-ping
tnl-policy ip_policy
quit
tdm-connect connectid 1 tdm pwe3-uplink 0/4 e1 0/4/5
pw-ac-binding tdm 2 pw 3
interface edt 0/4
adapt-clock-source clock-source 0 3
clock-work 5 net
4.4 Configuration Example of TDM SHDSL for
Transparently Transmitting the Narrowband Data Private
Line Service
The TDM SHDSL extends the access distance. With the TDM SHDSL, the MA5600T/
MA5603T/MA5608T transparently transmits user-side configuration data to the digital data
network (DDN). In this way, the twisted pair can be fully used and the E1 line deployment
expense decreases.
Service Requirements
l Use the existing rich twisted pair resources for long-distance transmission, extending the
DDN node.
l The user-side configuration data is transparently transmitted on the MA5600T/MA5603T/
MA5608T.
The following figure shows an example network of TDM SHDSL for transparently transmitting
the narrowband data private line service.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
4 Configuration Example of the Private Line Service
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
430
To Next Page
Loading...
Need help?
General
