name Smoke digital-alarm 15
huawei(config-if-power4830l-0)#power outside-digital 5 available-level low-level
name HEX digital-alarm 13
huawei(config-if-power4830l-0)#power outside-digital 6 available-level low-level
name MDF-door digital-alarm 9
huawei(config-if-power4830l-0)#display power system parameter
huawei(config-if-power4830l-0)#display power environment parameter
huawei(config-if-power4830l-0)#display power alarm
huawei(config-if-power4830l-0)#quit
huawei(config)#save
1.3.16.5 Configuring the Environment Monitoring Parameters of the EPS75-4815AF
This topic describes how to configure the environment monitoring parameters of the
EPS75-4815AF through the CLI.
Mapping Between Monitoring Parameters and Device Ports
Table 1-28 describes the mapping between the monitoring parameters displayed on the sensor
transfer box.
Table 1-28 Mapping between the monitoring parameters displayed on the host and the ports on
the sensor transfer box
Monitoring
Parameter
Displayed on
the Host
Device Port Application in the N66
Cabinet
Application in the
F01D500 Cabinet
Digital 0 JTD1 Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
Digital 1 JTD2 Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
Digital 2 JTD3 Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
Digital 3 JTD4 Not connected by default,
used to add a user-defined
monitoring digital
parameter
surge protector
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
To Next Page
Loading...
Need help?
General
