EasyManuals Logo

Huawei SmartAX MA5600T User Manual

Huawei SmartAX MA5600T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1626 background imageLoading...
Page #1626 background image
Configuration Item Data
Network-side of OLT Forwarding DHCP and broadband packets:
l VLAN ID: 2004
l Port number: 0/4/0
l IP address: 2001:0db8:0007::12/64
Forwarding CM management packets, multicast packets, and
VoD packets:
l VLAN ID: 2005
l Port number: 0/5/0
l IP address: 2001:0db8:0008::13/64
Router
l IP address of the Layer 3 interface for forwarding DHCP and
broadband packets: 2001:0db8:0007::6/64
l IP address of the Layer 3 interface for forwarding CM
management packets: 2001:0db8:0008::7/64
Server
l IP addresses of DHCP servers:
– DHCP server allocating IP addresses for CMs:
2001:0db8:0006::8/64-2001:0db8:0006::9/64
– DHCP server allocating IP addresses for PCs:
2001:0db8:0006::10/64-2001:0db8:0006::11/64
l IP addresses of the CM management system:
2001:0db8:0011::14/64-2001:0db8:0011::16/64
Procedure
Step 1 Configure a CM service provisioning mode, which can be IPv6 (preferentially used), APM, or
DPM (used for dual-stack service provisioning). Select a mode based on site requirements.
huawei(config)#interface cable 1/1/0
huawei(config-if-cable-1/1/0)#cable ip-mode dpm
huawei(config-if-cable-1/1/0)#quit
Step 2 Configure the IP address of the VLAN Layer 3 interface.
huawei(config)#ipv6 //Enable IPv6 packet forwarding.
huawei(config)#vlan 100
huawei(config)#interface vlanif 100
huawei(config-if-vlanif100)#ipv6 enable //Enable IPv6 on ports.
huawei(config-if-vlanif100)#undo ipv6 nd ra halt //enables a router to send
RA messages.
huawei(config-if-vlanif100)#ipv6 nd autoconfig managed-address-flag //Configure
the state-based auto-configuration address flag bit. The host obtains an IPv6
address using the state-based automatic configuration.
huawei(config-if-vlanif100)#ipv6 address 2001:0db8:0001::1/64 //Configure the
IP address of the gateway for the DHCP domain of CMs.
huawei(config-if-vlanif100)#ipv6 address 2001:0db8:0003::3/64 //Configure the
IP address of the gateway for the DHCP domain of PCs with fees paid.
huawei(config-if-vlanif100)#ipv6 address 2001:0db8:0004::4/64 //Configure the
IP address of the gateway for the DHCP domain of overdue PCs.
huawei(config-if-vlanif100)#quit
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
15 OptiCable D-CMTS Configuration (MA5633 Working as
a Remote Extended Frame)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1601

Table of Contents

Other manuals for Huawei SmartAX MA5600T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5600T and is the answer not in the manual?

Huawei SmartAX MA5600T Specifications

General IconGeneral
BrandHuawei
ModelSmartAX MA5600T
CategoryControl Unit
LanguageEnglish

Related product manuals