Video data transmission on HFC networks uses existing CATV coaxial cables on the HFC
networks, thereby reducing network deployment costs.
Data Plan
Table 15-40 Data plan for the VoD service
Item Data
EQAM IP address 10.10.10.10
VLAN ID of the VoD S-VLAN: 50; type of the VLAN: smart
Uplink port Forwarding CM management, VoD, and multicast packets: 0/5/0
EQAM channel ID 13-16
Modulation mode QAM 64
Symbol rate 6.875
UDP port number 501-514
Procedure
Step 1 Use a cable initialization profile to configure RF port parameters.
huawei(config)#interface cable init-template
huawei(config-cable-init-template)#cable downstream 13 frequency 115.0 modulation
qam64 enable channel-mode eqam symbol-rate 6.875
huawei(config-cable-init-template)#cable downstream 14 frequency 123.00 modulation
qam64 enable channel-mode eqam symbol-rate 6.875
huawei(config-cable-init-template)#cable downstream 15 frequency 131.00 modulation
qam64 enable channel-mode eqam symbol-rate 6.875
huawei(config-cable-init-template)#cable downstream 16 frequency 139.00 modulation
qam64 enable channel-mode eqam symbol-rate 6.875
huawei(config-cable-init-template)#quit
Step 2 Configure a video profile.
A video profile contains all video mappings on an EQAM module and supports batch video
mapping configurations. This facilitates video mapping configuration and management.
huawei(config)#cable eqam video profile name vod1
huawei(config-eqam-video-profile-vod1)#mapping index 1 type spts udp-port 501
output-program 1 pmtpid 32 channel 13
huawei(config-eqam-video-profile-vod1)#mapping index 2 type spts udp-port 502
output-program 2 pmtpid 48 channel 13
huawei(config-eqam-video-profile-vod1)#mapping index 3 type spts udp-port 503
output-program 3 pmtpid 64 channel 13
huawei(config-eqam-video-profile-vod1)#mapping index 4 type spts udp-port 504
output-program 4 pmtpid 80 channel 13
huawei(config-eqam-video-profile-vod1)#mapping index 5 type spts udp-port 505
output-program 1 pmtpid 96 channel 14
huawei(config-eqam-video-profile-vod1)#mapping index 6 type spts udp-port 506
output-program 2 pmtpid 112 channel 14
huawei(config-eqam-video-profile-vod1)#mapping index 7 type spts udp-port 507
output-program 3 pmtpid 128 channel 14
huawei(config-eqam-video-profile-vod1)#mapping index 8 type spts udp-port 508
output-program 1 pmtpid 160 channel 15
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
15 OptiCable D-CMTS Configuration (MA5633 Working as
a Remote Extended Frame)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1614
To Next Page
Loading...
Need help?
General
