CM
Status
Description Handling Suggestion
init-rc Indicates that the CM initialization
ranging is complete.
No action is required. The ranging of
the CM is complete.
DHCP Indicates that the DHCP discovery
from the CM is received.
If a CM initiates a DHCP request but
does not obtain an IP address, check the
DHCP server, routing between the
OLT and the DHCP server, and DHCP
server parameter settings.
l DH
CP-
O
l DH
CP-
R
l DH
CP-
C
l DHCP-O: indicates that the
offer from the DHCP server is
received.
l DHCP-R: indicates that the
DHCP request from the CM is
received.
l DHCP-C: indicates that the
acknowledge from the DHCP
server is received.
The DHCP server has assigned an IP
address to the CM and sent
configuration file name and IP address
of the TFTP or ToD server to the CM
using the Option 67 and Option 66
fields (the Option 67 field carries the
configuration file name and the Option
66 field carries the IP address of the
TFTP or ToD server).
If the CM is always in the DHCP-C
state, the CM fails to obtain the
configuration file. Then check the
TFTP server, routing between the OLT
and the TFTP server, and TFTP server
parameter settings.
REG
Indicates that a registration is
started.
If the CM is always in the register state,
the CM obtains an incorrect
configuration file. Then change the
configuration file.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
16 OptiCable D-CMTS Configuration (MA5633 Working as
a Standalone NE)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1729
To Next Page
Loading...
Need help?
General
