Huawei SmartAX MA5600T User Manual

huawei(config-vlan-srvprof-20)#commit
b. Enable the bridging function.
To support the electrical GOOSE function, ONU_A must communicate with ONU_B
at Layer 2.
huawei(config-vlan-srvprof-20)#user-bridging
enable
Info: Please use the commit command to make modifications take
effect
huawei(config-vlan-srvprof-20)#commit
huawei(config-vlan-srvprof-20)#quit
c. Bind the VLAN service profile to the uplink VLAN.
huawei(config)#display vlan service-profile profile-id 20
Command:
display vlan service-profile profile-id
20
Profile ID:
20
Profile Name:
srvprof-20
---------------------------------------------------------------------
Parameter Committed Not
Committed
---------------------------------------------------------------------
Forwarding mode NotConfig
-
Anti-macspoofing NotConfig
-
Anti-ipspoofing enable
-
PPPoE MAC mode NotConfig
-
BPDU tunnel NotConfig
-
RIP tunnel NotConfig
-
VTP-CDP tunnel NotConfig
-
DHCP mode n/a
-
DHCP proxy enable
-
DHCP option82 enable
-
PITP enable
-
Broadcast packet policy NotConfig
-
Multicast packet policy forward
-
Unknown unicast packet policy NotConfig
-
User-bridging enable
-
IPoE VMAC NotConfig -
PPPoE VMAC NotConfig -
PPPoA VMAC NotConfig -
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
17 Electrical Service Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1825

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English