Huawei SmartAX MA5600T User Manual

-
CTAG Mapping Priority:
-
CTAG Mapping Index :
-
CTAG Default Priority:
0
Priority Policy : local-
pri
CIR :
off
CBS :
off
PIR :
off
PBS :
off
Referenced Status : not
used
------------------------------------------------
huawei(config)#traffic table ip index 21 cir off priority 6 priority-policy
local-Setting
Create traffic descriptor record
successfully
------------------------------------------------
TD Index :
21
TD Name : ip-traffic-
table_21
Priority :
6
Copy Priority :
-
Mapping Index :
-
CTAG Mapping Priority:
-
CTAG Mapping Index :
-
CTAG Default Priority:
0
Priority Policy : local-
pri
CIR :
off
CBS :
off
PIR :
off
PBS :
off
Referenced Status : not
used
------------------------------------------------
huawei(config)#service-port 1 vlan 200 gpon 0/3/1 ont 1 gemport 1 multi-
service
user-vlan 100 rx-cttr 20 tx-cttr 20
huawei(config)#service-port 2 vlan 101 gpon 0/3/1 ont 1 gemport 2 multi-
service
user-vlan 101 rx-cttr 21 tx-cttr 21
10. Configure the bridging function for GOOSE packets.
a. Disable the unknown multicast suppression function.
Goose packets are unknown multicast packets. Disable the unknown multicast
suppression function on the OLT to ensure that GOOSE packets are not lost.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
17 Electrical Service Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1840

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English