Huawei SmartAX MA5600T User Manual

1. Create the service channels of the multicast users.
Create service port 100 on VDSL port 0/2/1, and service port 101 on VDSL port 0/4/1.
huawei(config)#port vlan 10 0/19 0
huawei(config)#port vlan 20 0/19 0
huawei(config)#service-port 100 vlan 10 vdsl mode ptm 0/2/1 rx-cttr 2 tx-cttr
2
huawei(config)#service-port 101 vlan 20 vdsl mode ptm 0/4/1 rx-cttr 2 tx-cttr
2
2. Configure the attributes of the multicast users.
Configure multicast user 0/2/1 as the authentication type, with log reporting enabled, and
with the maximum bandwidth 10 Mbit/s. Configure multicast user 0/4/1 as the
authentication type, with log reporting enabled, and with the maximum bandwidth 5 Mbit/
s.
huawei(config)#btv
huawei(config-btv)#igmp user add service-port 100 auth log enable max-
bandwidth 10240
huawei(config-btv)#igmp user add service-port 101 auth log enable max-
bandwidth 5120
3. Bind the multicast users to the right profiles.
Bind VDSL user 0/2/1 to right profile music, and VDSL user 0/4/1 to right profile
movie.
huawei(config-btv)#igmp user bind-profile service-port 100 profile-name music
huawei(config-btv)#igmp user bind-profile service-port 101 profile-name movie
4. Add the VDSL users to the multicast VLANs so that the VDSL users are multicast
members.
huawei(config-btv)#multicast-vlan 10
huawei(config-mvlan10)#igmp multicast-vlan member service-port 100
huawei(config-mvlan10)#multicast-vlan 20
huawei(config-mvlan20)#igmp multicast-vlan member service-port 101
huawei(config-mvlan20)#quit
Step 5 Save the configuration.
huawei(config)#save
----End
Result
l VDSL user 0/1/0 can watch the programs with IP addresses 224.1.1.1 and 224.1.1.2 that
are provided by ISP 1, but VDSL user 0/1/0 cannot watch the program with IP address
224.1.1.3.
l VDSL user 0/2/0 can watch the program with IP address 224.1.1.4 that is provided by ISP
2.
Configuration File
vlan 10 smart
multicast-vlan 10
igmp mode proxy
igmp uplink-port 0/19/0
igmp program add name program1 ip 224.1.1.1 sourceip 10.10.10.10
bandwidth 3500 log enable
igmp program add name program2 ip 224.1.1.2 sourceip 10.10.10.10
bandwidth 3500 log enable
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
296

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English