Are you sure to change IGMP mode?(y/n)[n]:y
huawei(config-mvlan100)#quit
l Configure the preview parameters.
In this example, configure preview authority profile 1 with the preview duration for
the program to 150s, the number of preview attempts to 6 each day, and the preview
interval to 60s.
huawei(config)#btv
huawei(config-btv)#igmp preview-profile index 1 duration 150 times 6
interval 60
huawei(config-btv)#igmp preview auto-reset-time 00:00:00
huawei(config-btv)#quit
l Configure the program library.
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp program add name program1 ip 224.1.1.1
sourceip 10.10.10.10
huawei(config-mvlan100)#igmp program add name program2 ip 224.1.1.2
sourceip 10.10.10.10
huawei(config-mvlan100)#igmp program add name program3 ip 224.1.1.3
sourceip 10.10.10.10
preview-profile 1
huawei(config-mvlan100)#quit
l Configure the authority profile.
huawei(config)#btv
huawei(config-btv)#igmp profile profile-name profile0 program-name program1
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program2
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program3
preview
l Configure the multicast user.
huawei(config-btv)#igmp user add port 0/2/15 adsl 0 35 no-auth
huawei(config-btv)#igmp user add port 0/2/16 adsl 0 35 auth
huawei(config-btv)#igmp user bind-profile port 0/2/16 profile-name profile0
huawei(config-btv)#quit
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp multicast-vlan member port 0/2/15
huawei(config-mvlan100)#igmp multicast-vlan member port 0/2/16
Step 14 Configure the subtending multicast service.
In the MSTP ring network, MA5600T/MA5603T/MA5608T-1 is subtended with MA5600T/
MA5603T/MA5608T-3, and MA5600T/MA5603T/MA5608T-3 is subtended with MA5600T/
MA5603T/MA5608T-4. According to the data plan, MA5600T/MA5603T/MA5608T-4
provides the multicast service. In this way, it is necessary to configure the multicast subtending
on MA5600T/MA5603T/MA5608T-2 first.
1. Configure the upstream port.
The upstream port is already added in Step 13.6. It is unnecessary to configure it again.
2. Configure the IGMP proxy.
The IGMP proxy is already configured in Step 13.6. It is unnecessary to configure it again.
3. Configure the program library.
The program library is already configured in Step 13.6. It is unnecessary to configure it
again.
4. Configure the multicast for the subtending port.
l Specify the subtending port.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
464
To Next Page
Loading...
Need help?
General
