EasyManuals Logo

Huawei SmartAX MA5600T User Manual

Huawei SmartAX MA5600T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #492 background imageLoading...
Page #492 background image
huawei(config-if-power4875l-0)#power module-num 2 1 2
huawei(config-if-power4875l-0)#quit
Step 6 Configure GIU subtending.
MA5600T/MA5603T/MA5608T-1 is subtended with MA5600T/MA5603T/MA5608T-2,
MA5600T/MA5603T/MA5608T-3 and MA5600T/MA5603T/MA5608T-4. Therefore, the
subtending should be configured.
huawei(config)#vlan 60 to 62 standard
huawei(config)#port vlan 60 to 62 0/19 0-1
huawei(config)#vlan 101 to 102 standard
huawei(config)#port vlan 101 to 102 0/19 0-1
huawei(config)#vlan 100 standard
huawei(config)#port vlan 100 0/19 0-1
Step 7 Enable MSTP.
1. Enable the MSTP function.
huawei(config)#stp enable
Change global stp state may active region configuration,it may take
several
minutes,are you sure to change global stp state? [Y/N][N]
Y
2. Set the MST region name.
huawei(config)#stp region-configuration
huawei(stp-region-configuration)#region-name hwrg
3. Configure MSTP instance 1.
huawei(stp-region-configuration)#instance 1 vlan 1 to 4094
4. Activate the configuration of the MST region.
huawei(stp-region-configuration)#active region-configuration
STP actives region configuration, it may take several minutes,are you sure
to
active region configuration? [Y/N][N]y
huawei(stp-region-configuration)#quit
Step 8 Configure the ADSL2+ service.
The MA5600T/MA5603T/MA5608T supports the ADSL2+ service of multiple encapsulation
modes, such as IPoA, PPPoA, IPoE, and PPPoE. This topic uses the PPPoE mode as an example
to describe how to configure the ADSL2+ service. For other encapsulation modes, see "3.1
Example: Configuring the xDSL Internet Access Service."
1. Configure the ADSL2+ line profile.
You can configure the ADSL2+ line profile based on your requirements.
huawei(config)#adsl line-profile add 10
Start adding
profile
Press 'Q' to quit the current configuration and new configuration will
be
neglected
> Do you want to name the profile (y/n)
[n]:
> Transmission
mode:
> 0:
Custom
> 1: All (G.
992.1~5,T1.413,ETSI)
> 2: Full rate(G.
992.1/3/5,T1.413,ETSI)
> 3: G.DMT (G.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
467

Table of Contents

Other manuals for Huawei SmartAX MA5600T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5600T and is the answer not in the manual?

Huawei SmartAX MA5600T Specifications

General IconGeneral
BrandHuawei
ModelSmartAX MA5600T
CategoryControl Unit
LanguageEnglish

Related product manuals