1. Configure the ADSL2+ line profile.
You can configure the ADSL2+ line profile based on your requirements.
huawei(config)#adsl line-profile add 10
Start adding
profile
Press 'Q' to quit the current configuration and new configuration will
be
neglected
> Do you want to name the profile (y/n)
[n]:
> Transmission
mode:
> 0:
Custom
> 1: All (G.
992.1~5,T1.413,ETSI)
> 2: Full rate(G.
992.1/3/5,T1.413,ETSI)
> 3: G.DMT (G.
992.1/3/5)
> 4: G.HS (G.
992.1~5)
> 5: ADSL (G.
992.1~2,ETSI,T1.413)
> 6: ADSL2 & ADSL2+ (G.
992.3~5)
> Please select (0~6)
[1]:
> Trellis mode 1-disable 2-enable (1~2)
[2]:
> Bit swap downstream 1-disable 2-enable (1~2)
[2]:
> Bit swap upstream 1-disable 2-enable (1~2)
[2]:
> Please select the form of transmit rate adaptation
downstream:
> 1-fixed, 2-adaptAtStartup, 3-adaptAtRuntime (1~3)
[2]:
> Please select the form of transmit rate adaptation
upstream:
> 1-fixed, 2-adaptAtStartup, 3-adaptAtRuntime (1~3)
[2]:
> Will you set SNR margin parameters? (y/n)
[n]:
> Will you set DPBO parameters? (y/n)
[n]:
> Will you set power management parameters? (y/n)
[n]:
> Will you set tone blackout configuration parameter? (y/n)
[n]:
> Will you set INM downstream parameter? (y/n)
[n]:
> Will you set RFI notch configuration parameter? (y/n)
[n]:
> Will you set mode-specific parameters? (y/n)
[n]:
> Will you set network timing reference? (y/n) [n]:
Add profile 10 successfully
2. Configure the ADSL2+ channel profile.
You can configure the ADSL2+ channel profile based on your requirements.
huawei(config)#adsl channel-profile add 10
Start adding
profile
Press 'Q' to quit the current configuration and new configuration will
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
475
To Next Page
Loading...
Need help?
General
