EasyManuals Logo

Huawei SmartAX MA5600T User Manual

Huawei SmartAX MA5600T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #991 background imageLoading...
Page #991 background image
Procedure
l Configure the Internet access service (on an HG239).
1. Log in to the Web configuration window.
a. Enter http://192.168.1.1/cu.html (default IP address) to the address bar of the
Internet Explorer (IE) and press Enter.
b. In the login dialog box, enter the user name and password of the administrator
(the Internet service provider (ISP) provides the default user name and default
password). Then, click OK.
2. Set parameters for the Internet access service.
Assume that ports LAN1 and LAN2 are Internet access ports for PCs.
a. Choose Network > Bandwidth Configuration from the navigation tree.
b. Create WAN connection 1 and set parameters based on the following table.
Parameter Value
Bearing
service
INTERNET
VLAN
enabling
Enabled: Upstream packets contain VLAN tags.
Disabled: Upstream packets do not contain VLAN tags.
NOTE
If uservlan is set to untagged when you configure a service flow for
the Internet access service on the ONU, set this parameter to
Disabled; otherwise, set it to Enabled.
VLANID
[1-4094]
If VLAN enabling is set to Enabled, this parameter takes
the value of uservlan that is specified when you configure a
service flow for the Internet access service on the ONU.
Binding item LAN1 and LAN2: PCs connected to ports LAN1 and LAN2
can simultaneously access the Internet.
Mode Bridge: PCs access the Internet in PPPoE dial-up mode.
c. Click OK.
3. Restart the HGW.
Choose Management > Device Management and click Restarting the Device.
l Configure the Internet access service (on an HG527).
1. Log in to the Web configuration window.
a. Enter http://192.168.1.1/cnc.html (default IP address) to the address bar of the
IE and press Enter.
b. In the login dialog box, enter the user name (default: admin) and password
(default: admin) of the administrator. Then, click OK.
2. Set parameters for the Internet access service.
Assume that ports LAN1 and LAN2 are Internet access ports for PCs.
a. Choose Network > Bandwidth Configuration from the navigation tree.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
966

Table of Contents

Other manuals for Huawei SmartAX MA5600T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5600T and is the answer not in the manual?

Huawei SmartAX MA5600T Specifications

General IconGeneral
BrandHuawei
ModelSmartAX MA5600T
CategoryControl Unit
LanguageEnglish

Related product manuals