User Manual
SmartAX MT800 ADSL CPE
Chapter 6 Troubleshooting Guide
6-4
connection will be dropped. Try with a telephone and find
the status of your ADSL signal line.
4) If you have contacted the ISP and they promised the
quality of ADSL line, it may be the hardware issue and
please contact your vendor.
Q: When can I use the “Restore Factory Default Setting”
button?
If you changed some setting unconsciously in the Web
Management Interface and you forgot the detailed values that you
modified, please use the “Restore Factory Default Setting” button to
recover the factory default settings.
Q: How many methods can be used to restore the factory
default setting?
Totally two methods: 1) by the restore button on the rear panel
of the device. Push it three times continuously to take the factory
default setting into effect; 2) Select the option Factory Setting
Reboot in the page of Save & Reboot and then click Submit button.
Q: How to connect multiple phones?
Follow the figures below to complete the installation.
Application 1:
To Next Page
Loading...
