What to do if the battery indicator blinks on my Huawei UPS2000-G?
If the battery indicator is blinking and the buzzer is buzzing, it indicates that the UPS is about to shut down due to insufficient battery reserve. To prevent data loss or damage, immediately save load data and shut down primary loads. Also, verify that the number of batteries and battery capacity are correctly set based on the actual configuration.
Why is the mains indicator off on my Huawei UPS?
The mains indicator might be off because the mains voltage or frequency exceeds the UPS input range. Use a multimeter to verify that the input voltage and frequency meet the specified requirements.
How to fix a Huawei UPS2000-G UPS when the LCD displays nothing?
If the LCD displays nothing and the system doesn't perform self-tests, first check the UPS input power cable connection to ensure the input power supply is properly connected. Also, use a voltmeter to check whether the UPS input voltage meets the required specifications, as it may be less than the lower threshold or greater than the upper threshold.
What to do if Huawei UPS does not start?
If the UPS does not start after pressing the power button, ensure that you press it for more than 5 seconds until you hear a beep sound.
General| Frequency | 50/60 Hz |
|---|---|
| Output Power Factor | 0.9 |
| Humidity | 0% to 95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Capacity | 1 kVA, 2 kVA, 3 kVA |
| Input Voltage | 220 Vac (120 Vac/208 Vac/230 Vac/240 Vac) |
| Output Voltage | 220/230/240 VAC |
| Efficiency | Up to 95% |
| Topology | Double conversion online |
| Battery Type | Sealed Lead Acid |
| Communication Ports | USB, RS232 |
| Optional Communication | SNMP |
| Operating Temperature | 0°C to 40°C |
Describes the UPS features, performance, appearance, structure, working principle, installation, operation, and maintenance.
Lists the target audience for this document, including engineers and technicians.
Defines the meaning of symbols used in the document, like DANGER, WARNING, CAUTION, NOTICE.
Details the revisions and updates made to the manual across different issues.
Provides safety precautions for personnel working with the UPS, including dangers of electric shock and required PPE.
Covers safety guidelines related to the UPS equipment itself, including operational and installation safety.
Specific safety requirements for operating the UPS, including environmental and electrical considerations.
Crucial safety guidelines for handling and maintaining batteries, covering hazards like short circuits, leakage, and temperature.
Details electrical safety measures, including grounding, cabling, and preventing electric shock.
Outlines the necessary environmental conditions for installing and operating the UPS to ensure performance and safety.
Covers mechanical safety aspects, including tool usage, cabinet installation, and moving heavy objects.
Details the various UPS models covered in the manual and their specifications.
Explains the conceptual diagram and working modes of the UPS, including normal, battery, bypass, and ECO modes.
Describes the physical appearance and input/output wiring configurations for different UPS models.
Lists and describes optional components that can be added to the UPS system for enhanced functionality.
Covers essential preparations before installing the UPS, including circuit breaker requirements and cable specifications.
Describes the overall process for installing the UPS, covering mechanical and cable connections.
Details the installation of a backfeed protection device to prevent voltage feedback.
Lists post-installation check items and their expected results to ensure proper setup.
Describes the meaning and status of each indicator light on the control panel.
Explains the function of each button on the UPS control panel for operation and setting.
Presents the hierarchical structure of the LCD menus for navigating settings and information.
Details how to view the UPS status, including mains input, bypass input, battery status, and inverter output.
Explains how to view active, historical, and sorted alarms, and how to clear them.
Guides users through accessing and configuring various UPS settings, including passwords and feature codes.
Describes how to control the UPS operations, including startup, shutdown, and battery maintenance tasks.
Pre-operation checklist to ensure the UPS is ready for powering on safely and correctly.
Procedures for operating a single UPS unit, including cable installation and startup.
Covers operations for parallel UPS systems, including cable installation and system startup.
Outlines routine maintenance tasks for the UPS, including checks on operating environment, power grid, LCD, cleanliness, and parameters.
Provides guidelines for battery maintenance, including precautions, routine checks, and troubleshooting.
A table listing common UPS symptoms, possible causes, and recommended measures for resolution.
Provides physical dimensions, weight, and IP rating for different UPS models.
Outlines environmental requirements like humidity, altitude, and storage/transportation temperatures.
Details electrical specifications for the mains input, including voltage, current, and cable requirements.
Provides electrical specifications related to the bypass input, including voltage thresholds and overload capability.
Lists electrical specifications for the UPS output, covering capacity, voltage tolerance, THDv, and overload capability.
Details electrical specifications for the battery system, including voltage, number of batteries, and charger ratings.
Defines voltage and frequency tolerance parameters for the ECO mode operation.
Outlines specifications for parallel UPS system configurations, including the number of UPSs.
Provides a comprehensive list of potential alarms generated by the UPS system.
Lists parallel parameters that can be synchronized between UPS units in a parallel system.
Highlights differences in LCD display, password, working modes, and battery parameters across UPS models.
Details the parameters available under the Status menu, including mains, bypass, battery, and inverter output information.
Outlines the Alarms menu structure, covering active, historical, sort, and clear alarms.
Describes the Settings menu hierarchy, including basic settings, communication cards, system parameters, and battery parameters.
Control menu options for starting, shutting down, replacing batteries, and managing sync parameters.
Options for battery maintenance, including shallow discharge, capacity tests, and manual charging.
Provides information about the UPS model, ESN, and software versions.
States the conditions and models for which air filter maintenance is applicable.
Step-by-step instructions for removing, cleaning/replacing, and reinstalling the air filter.
Procedure for clearing the battery maintenance notification alarm and disabling the function.
Method for testing battery loop reliability and short-time backup capacity after extended idle periods.
Method for testing battery real-time capability and long-time backup capacity after prolonged inactivity.
Steps to return a UPS with a bypass power supply alarm to normal mode and silence the alarm.
Glossary of acronyms and abbreviations used throughout the manual.
To Next Page
