Chapter 3 • Installing the HN7000S remote terminal
40
1037076-0001 Revision C
3. Scroll down and click Start Registration on the System
Control Center home page to access the Registration screen.
4. In the Registration ID fields, enter the 28-digit registration ID
you received when you purchased your upgrade.
5. Click Next.
Figure 34: Accessing the HN7000 System Control Center
Note: Do not be alarmed if the System Status indicator is
red and the word Problem appears beneath it. This merely
indicates that the HN7000S remote terminal has not been
registered yet.
Note: The Registration ID fields are case-sensitive and do
not recognize the letter o, only the number zero (0). Enter the
registration ID exactly as it appears in the confirmation email
you received after purchasing your upgrade.
To Next Page
Loading...
Need help?
General