Appendix A • Configuring Windows network settings manually for static IP address
64
1037076-0001 Revision C
6. In the General tab, select Use the following IP
address
.
7. In the IP Address field, enter an appropriate IP address from
the range of available IP addresses listed in the System
Control Center.
8. In the Subnet Mask field, enter the LAN1 Subnet Mask.
9. In the Default Gateway field, enter the LAN1 IP Address.
10. Enter 66.82.4.8 in the Preferred DNS server field and
66.82.4.12 in the Alternate DNS field. See Figure 55.
11. Click OK to close the open dialog boxes and finish the
configuration.
12. Restart the computer even if Windows does not prompt you
to do so. This ensures that the network settings are
automatically reset.
Figure 55: Entering the preferred DNS server address
To Next Page
Loading...
Need help?
General