Version 24DM
Adjustments 7--7
" Pull out the piston, if necessary, using a pair of pliers, until it protrudes
44 mm from the cylinder.
" Top up with AGIP ATF DEXRON oil or one with similar characteristics using
a funnel.
" Screw on the filler cap.
" Using the handwheel, tension the blade to 70 Bar = 900 Kg = 1015 psi.
The machine ent ers emergen cy statu s if the blade tension is too slack. A
pres sure contact (press ur e switch) dis abl es blade star t--up if the blade i s not cor-
rec tl y tensi oned, sinc e it mi ght otherw i s e sli p of f the wheels, cut poorly or wear
prem aturely. Thi s shoul d alway s be born in mind when using the mac hi ne.
Attention
To Next Page