1--1
Foreword
This work tool has been designed to satisfy the wide range of cutting needs of a
modern workshop with simplicity and reliability, while at the same time comply-
ing with all EEC safety standards.
The DM 8 is structurally rigid, silent and safe: it produces a minimum of waste
(1.2 mm = 0.05 in.) while its great versatility makes it suitable for cutting various
materials such as stainless steel light alloys, aluminium, copper and bronze at
high speed and with high precision.
Its high cutting capacity, which enables it to handle both single workpieces and
bundles, combined with the possibility of making inclined cuts from 60˚ left to
45˚ right, make this model the ideal solution for satisfying the wide strange of
cutting needs of machine shops, turneries, structural steel shops and engineering
workshops.
We congratulate our clients on having chosen this product, which will give
effective and faithful service for many years, especially if the instructions
contained in this use and maintenance manual are carefully followed.
This cutting machine has been designed and made specifically for cutting me-
tallic materials.
Warning
1
Introduction and
technical
specifications
To Next Page
Loading...