MEP S.p.A.
8--4 Use and maintenance manual DM 8
Oil fo r lubricant/coolant fluid
The emulsible oil used for the lubrication/coolant fluid in the machine is CAS-
TROL Syntolin TFX. Though there are no specific standards for these types of
oils, MEP considers that CASTROL Syntolin
TFX is the best product available with regard to quality:price ratio. Nevertheless,
the following oils of similar characteristics can be said to be compatible:
AG I P N B 2 0 0 --- S H E L L L u t e m T T --- I P U t e n s F l u i d --- F
Coolant tank
--- tank capacity 13 litres
--- oil concentration 5---6%
Recommended cutting fluid is LENOX BAND---ADE SAWING FLUID distrib-
uted by LENOX and, since it is a cutting fluid, it isn’t necessary to emulsify it with
water.
To Next Page