Version 24DM
Safety and accident prevention 3--3
Recommendations to the operator
Always wear proper goggles or protective glasses.
Do not use the machine without the guards in place.
Do not allow hands to encroach on the cutting zone while the machine is
operating or still in motion.
Do not wear oversize clothing with long sleeves, oversize gloves, brace-
lets, necklaces or any other object that may become entangled in the ma-
chine during working; long hair must be tied back and bunched.
Before sta rting cutting operations, support the material at both ends of
the machine using the support arm (standard) or OPTIONAL accessories
such as the feed and discharge roller tables shown in the diagram below.
FEED SIDE ROLLER
TABLE 1500 mm
(59.05 in.)
DISCHARGE SIDE
ROLLER TABLE 1500 mm
(59.05 in.)
Alwaysdisconnectthepowersupplytothemachinebeforecarryingout
any maintenance work whatsoever, including when the machine is oper-
ating abnormally.
Any maintenance work on the hydraulic or pneumatic systems must be
carried out only after the pressure in the system has been released.
To Next Page
Loading...