General Information: 1-8
RESPONSIBILITIES
The Purchaser’s Responsibilities
Prior to purchasing a van, ensure that the payload is suitable for all of the equipment
that will be installed and transported. This includes and is not limited to: the truckmount,
recovery tanks, fresh water tanks and on-board water, hose reels, hoses, cleaning tools,
chemicals, drying equipment, etc. Payload capacity information is available through the
auto dealer, the manufacturer’s web site, and is also located on the door pillar of the
driver’s side door.
Purchase a heavy duty Group 24 (550 CCA or better) battery for this truckmount. This is
normally available from the installation dealer.
Prior to dropping your van o at the distributor for the truckmount to be installed, have a
spray-on bed liner applied to the oor such as Rhino Lining® or Line-X®.
Prior to operating the truckmount read this manual in its entirety and familiarize yourself
with the information contained here. Special attention should be paid to all cautions and
warnings.
The distributor is responsible for the correct installation of the truckmount. The distributor
is also responsible to train you in the correct and proper operation and maintenance of
the truckmount.
Any modication of the truckmount may void the warranty.
The Distributor’s Responsibility
Acceptance of Shipment
Before accepting the truckmount, check the following:
• The truckmount should be free from any damage during shipping. Do not sign the
delivery receipt until you have closely inspected the truckmount and noted any damage
on the delivery receipt. Hidden damage may be present even if the box looks okay. It
is recommended that the box be opened before signing for the shipment.
• Check the packing list and verify that all items are accounted for.
To Next Page
Loading...
