Warranty Information: 10-2
VACUUM AND SOLUTION HOSES
• Failure to protect hoses against freezing.
• Failure to protect hoses against burns from engine and blower exhaust.
• Damage to hoses from being run over by vehicles.
• Kinking or cracking from failure to store or unroll hoses correctly.
• Normal wear and tear from everyday use.
CLEANING WAND AND TOOL
• Failure to protect against freezing.
• Obvious physical abuse of wand or tool.
WATER HEATING SYSTEM
• Over-pressurization of the system (recommended maximum working
pressure -
1,000 psi).
• Failure to protect against freezing.
HARD WATER DEPOSITS
• Failure to use or maintain a water softening system or a properly installed magnetic-
type descaler, whichever might be necessary, with machines operating in designated
“Hard Water Areas” (3.5 grains or more per gallon).
To Next Page
Loading...
