Installation
DynaMAX 550P/560P/575P Waterjet Pump Operator Manual 811390 211
Remote Configuration
Analog Pressure This turns the remote analog pressure input on or off.
Modbus Mode This turns Modbus mode on or off.
When this mode is on:
• a Modbus symbol shows on the primary operation screen.
• the pump is controlled by Modbus TCP over Ethernet.
Modbus Pressure This turns Modbus control of the pump pressure on or off.
IP Address Enter a static IP address.
Netmask Enter the netmask.
Gateway Enter the gateway.
To Next Page
Loading...
